Factory Reset Roku Device- Tips & Tricks

Routers are used in home and offices for connecting the devices.

Sometimes due to certain reasons router starts working slow and create hindrance in the online work.

In such a situation, a user needs to reset their router to get out of all the troubles.

For router reset, a user can contact TP link customer care for the guidance.

Below the process is discussed following which you can reset the router.

This process will help you to reset your router to factory defaults without any hassle.

 Once you have logged in into the jiofi.local.html Web Admin panel, you can change the JioFi password by navigating to Settings > Wi-Fi > Security Key.

Once the changes are applied the Wi-Fi module will be restarted, it will cause the WiFi disconnection.Password Tip:  You would want to change your password to a combination that cannot be guessed by anyone and only you know about it.

Usually, a combination of letters, digits, and special symbols make for a strong password.Troubleshoot jiofi.local.html not openingIf you are not able to open the webpage on jiofi.local.html then it could be due to several reasons.

It may be that there is some problem in the settings due to which you are not able to open jiofi.local.html or it could be some other problem.

Whatever the problem may be, the fix to this is very easy and simple.

To fix this issue of jiofi.local.html not opening all you have to do is to factory reset your JioFi device.When you will factory reset your JioFi device then all the settings will be reverted back to the defaults including any faulty settings that may be causing this issue.

Sometimes you need to reset Linksys range extender, it is very easy, press and hold the reset button on the range extender for ten seconds and release it, you can use web-based reset, and your login in the page and go to administration and do factory defaults.it is easy if you need help Extender.Linksys.com.

ROKU ERROR CODE 014.20If the Roku error code 014.20 pops on your screen, it clearly indicates a network issue.

This signifies that your Roku device finds it hard to connect with the network.

You can take the help of our Roku expert team who are always available with their support and services to help you fix the error.You just have to call at our toll-free number to get their assistance in Roku error code 014.20.

For more information contact our toll-free number 1-844-769-9823How to fix Roku error code 014.20Placing the Roku device far from the router will weaken the signal strength and thus resulting in the error code.

So,try placing the router close to the Roku device.Now, restart both the Roku device and your router.Go to the Settings menu and then select System.

Select the System Restart option there, and wait for the device to do thatYou can also try rebooting the router by unplugging it from the power source and then plugging it back in.The problem might be with the wireless password, so try re-entering it.

Is your Canon MG3222 printer facing an error in printing?

Well, if you want your printer to start working again then you need to perform a Canon MG3222 WiFi printer reset.

If you do not know the steps for it then don’t worry.

We are here to help you!

In this article, you will get to know the simple instructions for Canon MG3222 WiFi setup and the factory reset of MG3222 when the printer is not working properly.

Sometimes a quick reset of the printer solves significant errors or issues with it.

One of the finest brands you use for home networking products is TP-Link, and the TP-Link router is well-known because of its quality and reliability.

The portable router of the brand is famous because of its stable connection and compact design.

The TP-Link router allows the tablet and computer to share the devices and also provides a hotspot connection.

But, sometimes, it is difficult to use a TP-Link router, and in that situation, the perfect option is to perform a factory reset TP-Link router to resolve most of the issues and errors.One condition for a factory reset TP-Link router is that you might lose the configuration and settings of the router.

After finding the button, follow the below-mentioned steps:Power on your router and then hold the WPS button for at least 10 seconds, or you can hold until the SYS LED starts flashing.

When the light flashes from slow to quick, release the button.Wait for some time, and the router will automatically start the factory reset process.How To Perform Factory Reset TP-Link Router Using Web Interface?Now, let’s check out the steps to perform a factory reset TP-Link router while using the web interface; here are some steps that you need to check:Start by going to the router’s web interface and from there set up IP/TCP protocol to obtain the IP address.Now, go to their official website http://tplinkwifi.net and create your login credentials, i.e., settings TP-Link archer C50 default password and username.

Sometimes also called as Hard Reset, Factory Reset basically wipes out all the data from your smartphone in just a snap of your fingers.

Well, not exactly in just a snap of your fingers, but yes, it lets you delete all of your files, all of your data, apps, images, videos and everything by just tapping a button.

Factory resetting the phone is the ultimate solution to most of the issues related to your Android smartphone.

Whether you want to fix a problem or just want to start afresh with your device, factory resetting your smartphone is the way to go.

Step 1: First of all, you need to go to the Settings menu of your device.

Step 2: Find and tap on an option which says ‘Backup & Reset’.

You should think twice before doing a factory reset as it restores the default information, as well as options, while also deleting the data of your device.

This should be the last option for making your device work, in case of some issues or errors.

In this blog, we will discuss the process of factory resetting Android tabs.The method of doing a factory reset with the help of tablet settingsRemember that all of the Android devices shall have the ‘Factory reset’ option in the ‘Settings’ application.Note that not all of the Android tablets are same, but generally, you need to follow the given below steps for doing the factory reset.Firstly, press the ‘Menu’ option.Then, search and choose the ‘Settings’ application from the tablet’s home screen.After that, visit the ‘Personal’ part.Next, choose ‘Backup and Reset.’After that, click on the ‘Factory data reset.’Lastly, give confirmation.If it is successful, then your Android tablet shall restart and begin the deleting work.

Give it time for doing the same, as soon as things get deleted, and then it shall by itself go for a reboot.It is worth noting that unfortunately that not each of the Android models have the same interface.

So the above-mentioned steps do vary a bit sometimes.The method of doing a factory reset with the help of recovery mode For going to the recovery mode, you need to do a long press on the designated hotkeys.

Although it might not be the same in all the Android devices.The method of finding the recovery modeAs soon as your Android tablet enters recovery mode, it shall show a picture of an avatar at the upper side.

In that case, the resetting procedure of the MacBook is important because you cannot sell your device with your personal data stored in it.

The users have to delete the personal details and reset the device so that they can sell their device without having any risk.

The instructions given below are for the users of the MacBook Air, just follow the steps to factory reset your MacBook Air.

Steps to Factory Reset Your MacBook Air

Here are the guidelines mentioned to factory reset your MacBook Air:

The users have to go through the procedure of creating the backup of the MacBook Air before starting the reset process.