Sachiya Steel International is one of the prominent Manufacture and Exporter of Stainless Steel 317L Forged Threaded Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels. Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface.
This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product. The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross.
Stainless Steel 317L Forged Threaded Fittings | Stainless Steel 317L Forged Threaded Fittings | Stainless Steel 317L Forged Threaded Fittings | Stainless Steel 317L Forged Threaded Fittings
Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion resisting material in corrosive environments.
Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component. Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims. In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.
Stainless Steel 317L Forged Threaded Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
SS 317L Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 317L | 0.035 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 18.00 – 20.00 | 3.00 – 4.00 | 11.00 – 15.00 | 57.89 min |
Stainless Steel 317L Threaded Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Sachiya Steel International is one of the Leading Manufacture and Exporter of Stainless Steel 317L Threaded Forged Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels.
Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface.
This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product.The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross.
Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion resisting material in corrosive environments.Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component.
Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims.
In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.
Sachiya Steel International is one of the Leading Manufacture and Exporter of Stainless Steel 317L Threaded Forged Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels.
Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface.
This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product.The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross.
Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion resisting material in corrosive environments.
Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component.Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims.
In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.
Sachiya Steel International is one of the well-known Manufacture and exporter for high quality SS 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
Sachiya Steel International is one the leading manufacturer and exporter of Monel K500 Threaded Forged Fittings, where our expert professionals make use of excellent quality material in the production process.
Typical applications for our Monel K500 Forged Threaded Elbow (UNS N05500) are pump shafts and impellers; doctor blades and scrapers; oil – well drill collars and instruments; electronic components; springs; and valve trim.
These Monel K500 Forged Threaded Tee is a nickel – copper alloy, precipitation harden able through additions of aluminum and titanium.
Our Monel K500 Forged Threaded Cross has approximately three times the yield strength and double the tensile strength when compared with Monel 400 Forged Threaded Cross Fittings.These Monel K500 Forged Threaded Cap also has excellent corrosion resistance together with increased strength and hardness of that of Alloy 400.
Meanwhile, our Monel K500 Forged Threaded Fittings are also being offered in different sizes and shapes to our customers.
These Monel K500 Forged Threaded Coupling can be readily joined and fabricated, which further has excellent mechanical properties at subzero temperatures.Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings | Monel K500 Threaded Forged Fittings By proper control of the amount of hot or cold work and by the selection of appropriate thermal treatments, finished fabrications in our Monel K500 Forged Threaded Union can be produced to a rather wide range of mechanical properties.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices.
The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures.
Stainless Steel 304L Threaded Forged Tee does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.Stainless Steel 304L Threaded Forged Cross Performs well in freshwater service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting.
Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes.
The best machining results in Stainless Steel 304L Threaded Forged Fittings are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings For maximum corrosion resistance, Stainless Steel 304L Threaded Forged Coupling should be annealed at 1900 Degree F (1038 Degree C) minimum and water quenched or rapidly cooled by other means after hot working.
Stainless Steel 304L Threaded Forged Union is not suitable for use with sulphide, nitric acid, acid chromates, or oxidizing salts such as ferric chloride.
