Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy C276 Wire which is considered moderate – to – difficult to machine, but can be machined using conventional methods. Our Hastelloy C276 Wire offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts. This Hastelloy C276 Coil Wire is non – magnetic in the annealed condition but may possibly become slightly magnetic as a result of cold working or welding.
Our Hastelloy C276 Wire is versatile, general purpose stainless steels with good resistance to atmospheric corrosion, to a lot of organic and inorganic chemicals, and to foods and beverages. This Hastelloy C276 Coil Wire has as well been used in vacuum processing equipment and specialized instruments where high integrity is essential. Our Hastelloy C276 Electrode offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts.
This Alloy C276 Filler Wire is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness. Forging of our Alloy C276 Wire should be started immediately when the stock is removed from the reheat furnace and 25 % / 40 % reductions help to retain as much internal heat as possible.
|
Hastelloy C276 Wire Specifications
|
||
| Specifications | : | ASTM B574 ASME SB574 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Hastelloy C276 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.010 max | 15.00 – 17.00 | 1.00 max | 0.08 max | 4.00 – 7.00 | 0.04 max | 0.03 max | 2.5 max | 14.50 – 16.50 |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 52,000 , MPa – 355 | Psi – 1,15,000 , MPa – 790 | 40 % |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Hastelloy C276 | N10276 | 2.4819 | – | NiMo16Cr15W | NW 0276 | – | ХН65МВУ |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Hastelloy C276 Wire MeshSachiya Steel International is one of the prominent Manufacture and Exporter of Hastelloy C276 Wire Mesh, where an in – process anneal may be necessary with a high degree of cold working.
Hastelloy C276 Hexagonal Wire Mesh should preferably be machined in the annealed condition, where a post weld heat treatment is not necessary.
Since Alloy C276 Welding Wire Mesh is prone to work – hardening, only low cutting speeds should be used and the cutting tool should be engaged at all times.
Hastelloy C276 Netting Wire Mesh can be readily welded by most standard processes including GTAW (TIG), PLASMA, GMAW (MIG / MAG) and SMAW (MMA).Hastelloy C276 Woven Wire Mesh should be in the annealed condition for cold working.
Hastelloy C276 Spring Steel Wire Mesh has a higher work – hardening rate than the austenitic stainless steels which should be taken into consideration.
The corrosion – resistant of Hastelloy C276 Fencing Wire Mesh are widely used by the chemical processing industries.The need for reliable performance leads to the acceptance and growth of Alloy C276 Hexagonal Wire Mesh in the areas of geothermal, solar energy, oil and gas and pharmaceutical.
Sachiya Steel International offers a wide range of Hastelloy C276 Threaded Forged Fittings, which is available in variegated specifications which suits diverse requirements of our esteemed customers.
Hastelloy C276 Forged Threaded Elbow Fittings (UNS N10276) has resisted the formation of grain boundary precipitates in the weld heat – affected zone, making it a candidate for most chemical and petrochemical processing applications in the as – welded condition.
Hastelloy C276 Forged Threaded Tee Fittings has exceptional resistance to a wide variety of chemical environments.Hastelloy C276 Forged Threaded Cross Fittings is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process application in an as welded condition.
Hastelloy C276 Forged Threaded Cap Fittings is weldable by all common methods except that excessive heat input should be avoided.
Meanwhile, these Hastelloy C276 Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers.Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged FittingsHastelloy C276 Forged Threaded Coupling Fittings show only slightly better non – corrosive properties than straight carbon – steels, and the reason for their wide use is the high physical properties which will be brought about by heat -treatment.
All of the common methods of welding can be used in Hastelloy C276 Forged Threaded Union Fittings, although the oxyacetylene and submerged arc processes are not recommended when the fabricated item is for use in corrosion service.
Sachiya Steel International is one of the prominent Manufacture and Exporter of Hastelloy C276 Tube to Female Pipes, which is particularly resistant to pitting and crevice corrosion.
Hastelloy C276 Tube Fittings has been used extensively to protect against the most corrosive FGD systems and the most sophisticated pharmaceutical reaction vessels.
Hastelloy C276 Compression Fittings has been very successful as phosphoric acid heat exchanger tubing and for other process components in the fertilizer industry.
Hastelloy C276 Female Connector Fittings is a new Ni – Cr – Mo alloy with superior resistance to hydrochloric and sulphuric acids, without the drawbacks of the Ni – Mo and Zr materials.The resistance of Hastelloy C276 Ferrule Fittings to these key chemicals is much greater than that of the popular Ni – Cr – Mo alloys.
Hastelloy C276 Double Ferrule Fittings has the outstanding resistance to pitting and crevice attack in chloride salt solutions.
Alloy C276 Female Connector Tube Fittings even withstands high levels of oxidizing impurities that the Ni – Mo alloys cannot cope with.
