Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304L Tube to Union, which is designed to be as the low carbon version and a medium carbon stainless steel. Stainless Steel 304L Tube Fittings has many of the same characteristics and applications as 316, such as the ability to withstand high temperatures, resistance to oxidation and corrosion, and machinability similar to that of Stainless Steel 304L.
Composed of 20 percent nickel and 25 percent chromium, Stainless Steel 304L Compression Fittings is efficient in reducing environments such as those that contain Sulphur. Combined with its low carbon content, Stainless Steel 304L Union Tube Fittings is also effective at resisting embrittlement. Stainless Steel 304L Ferrule Fittings is commonly utilized in extreme conditions, such as furnace manufacturing and heat treating equipment. While both hot and work practices can be applied, cold working is not commonly done on Stainless Steel 304L Double Ferrule Fittings; however, it is the only way to work – harden the metal.
Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union
This resistance to cold temperatures is useful in cryogenic environments, as SS 304L Tube Fittings is incredibly tough. However, SS 304L Compression Fittings can be subject to thermal shock and therefore should be treated and hot – worked with care. SS 304L Union Fittings has ultra – high nickel content of 34 percent to 37 percent also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres.
Stainless Steel 304L Tube to Union Specifications |
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 304L Tube To Union Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 304L | 0.035 | 2.0 max | 1.0 max | 0.045 max | 0.03 max | 18 – 20 | – | 8 – 13 | – |
Stainless Steel 304L Tube To Union Mechanical Properties
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 304L | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 304L Stainless Steel Ferrule Fitting Tube To Union
| Grade | UNS | WERKSTOFF NR | JIS | BS | GOST | AFNOR | EN |
| 304L | S30403 | 1.4306 / 1.4307 | SUS 304L | 3304S11 | 03Х18Н11 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 |
SS 304L Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304L Tube to Male Fittings, which is tougher than grade 304 stainless steel with a long stringy chip however, using chip breakers is recommended.
Machining of our Stainless Steel 304L Tube Fittings requires low speeds and constant feeds to reduce its tendency to work harden.
Welding of these Stainless Steel 304L Compression Fittings can be performed using most of the conventional fusion and resistance methods.Oxyacetylene welding for our Stainless Steel 304L Compression Tube Fittings should be avoided, where filler metal is recommended.
Conventional hot working processes can be performed, where these Stainless Steel 304L Male Connector Tube Fittings should be heated to 1149 Degree C – 1260 Degree C (2100 Degree C – 2300 Degree F); however, it should not be heated below 927 Degree C (1700 Degree F).To optimize corrosion resistance, a post – work annealing of our SS 304L Tube Fittings is recommended.
Shearing, stamping, heading and drawing are possible with these SS 304L Male Run Tee, and post – work annealing is recommended to eliminate internal stresses.
Annealing of our SS 304L Male Connector Fittings is performed at 1010 Degree C – 1121 Degree C (1850 Degree F – 2050 Degree F), which should be followed by rapid cooling.
Sachiya Steel International is one of the specialized manufacturer & Exporter of Stainless Steel 304L Tube to Female Pipes, which is readily fabricated by standard commercial procedures.
In comparison to carbon steel, Stainless Steel 304L Tube Fittings are tougher and tend to work harden rapidly.
Stainless Steel 304L Compression Pipe Fittings is a heat resisting stainless steel by means of high resistance to oxidation scaling and has great strength at high temperatures.Stainless Steel 304L Ferrule Pipe Fittings is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 1200 Degree F. Stainless Steel 304L Double Ferrule Pipe Fittings can be welded using all of the common welding processes, which is combined with better creep properties at temperature and is very tough and ductile.
Stainless Steel 304L Female Connector Pipe Fittings has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing Sulphur gases are not present.Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female PipesWith its high chromium content, Alloy 304L Compression Fittings offers good corrosion resistance to increase high temperature properties.
The high chromium and nickel contents of Grade 304L Female Pipe Fittings provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys.
SS 304L Compression Pipe Fittings is utilized for ease of fabrication, where in most instances the grain size and carbon content of the plate can meet both excellent requirements.Stainless Steel 304L Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 304L Stainless Steel Tube to Female Pipes Chemical Composition GradeCMnSiPSCrMoNiN304L0.030 max2.0 max0.75 max0.0450.03018.0-20.0–8.0-12.00.10 Stainless Steel 304L Tube to Female Pipes Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardness Rockwell B (HR B) maxHardness Brinell (HB) max304L4851704092201 Stainless Steel 304L Tube to Female Pipes Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/°C)Thermal Conductivity (W/m.K)Specific Heat 0-100°C (J/kg.K)Electrical Resistivity (n.m)0-100°C0-315°C0-538°Cat 100°Cat 500°C304L800019317.217.818.416.221.5500720 Equivalent Grades for 304L Stainless Steel Tube to Female Pipes AISI Grade EquivalentJIS EquivalentStainless Steel NotationEN/DIN Numerical EquivalentUNSdesignationEN/DIN Symbolical EquivalentAISI 304LSUS304LSS 304LEN 1.4307UNS S30403X2CrNi18-9 SS 304L Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
