Sachiya Steel International is a leading Manufacturer And Exporter of Hastelloy B3 Tube to Male Fittings, which has some admirable features to offer such as durable, fine finish, accurate dimensions, and so on. Hastelloy B3 Tube Fittings has a special understanding deliberate to accomplish a level of thermal stability that is significantly higher to that of its forerunners. Hastelloy B3 Compression Fittings is not suggested for use in the existence of cupric or ferric salts for the reason that these salts can source untimely failure. Hastelloy B3 Male Connector Fittings has excellent oxidation and creep resistance, and has an unusual chemistry considered attaining superior thermal constancy than Alloy B-2, resulting in stress – free fabrication.
Hastelloy B3 Ferrule Fittings (UNS N10675) has immense resistance to heat – affected and knife – line area attack. Meanwhile, these Hastelloy B3 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers. A comparison of yield strengths for the very high strength conditions in Alloy B3 Male Connector Fittings is exposed along with that of the annealed and “standard” conditions.
Alloy B3 Tube Fittings, does not recommend use of highly cold worked and aged material because the increase in yield strengths is minimal and the susceptibility to hydrogen embrittlement in severe oil well conditions is increased. While this strength level is almost double of Alloy B3 Compression Fittings in the annealed condition, many oil and gas applications require even greater strength.
|
Hastelloy B3 Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Hastelloy, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | Al | P | Fe | Mo | Ni | Cr | Ti | W | V |
| Hastelloy B3 | 0.01 max | 3.0 max | 10 max | 0.50 max | – | 1.5 | 28.5 | 65.0 min | 1.5 | 0.2 max | 3.0 max | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 9.2 g/cm3 | 1370 °C (2550 °F) | Psi – 1,15,000 , MPa –760 | Psi – 52,000 , MPa – 350 | 40% |
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| Hastelloy B3 | 2.4600 | N10675 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Tube to Male Fittings, which has some admirable features to offer such as durable, fine finish, accurate dimensions, and so on.
Hastelloy B3 Tube Fittings has a special understanding deliberate to accomplish a level of thermal stability that is significantly higher to that of its forerunners.
Hastelloy B3 Compression Fittings is not suggested for use in the existence of cupric or ferric salts for the reason that these salts can source untimely failure.
Hastelloy B3 Male Connector Fittings has excellent oxidation and creep resistance, and has an unusual chemistry considered attaining superior thermal constancy than Alloy B-2, resulting in stress – free fabrication.Hastelloy B3 Ferrule Fittings (UNS N10675) has immense resistance to heat – affected and knife – line area attack.
Meanwhile, these Hastelloy B3 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.
A comparison of yield strengths for the very high strength conditions in Alloy B3 Male Connector Fittings is exposed along with that of the annealed and “standard” conditions.Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male FittingsAlloy B3 Tube Fittings, does not recommend use of highly cold worked and aged material because the increase in yield strengths is minimal and the susceptibility to hydrogen embrittlement in severe oil well conditions is increased.
Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Tube to Union Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain.
Hastelloy B3 Compression Fittings (UNS N10675) is a nickel – molybdenum alloy with excellent resistance to pitting, corrosion, and stress-corrosion cracking plus, thermal stability superior to that of alloy B-2.
Hastelloy B3 Tube Fittings has been primarily used for their resistance to corrosion in non – oxidizing environments such as HCl.
Hastelloy B3 Ferrule Fittings also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.Hastelloy B3 Double Ferrule Fittings can function under very high temperatures and severe mechanical stress, and also where high surface stability is required.
Meanwhile, these Hastelloy B3 Union Fittings are also being offered in customized sizes and shapes to our customers.
Early testing of Alloy B3 Compression Tube Fittings was focused on material in the annealed and age – hardened condition where the material was annealed at 1975 Degree F (1079 Degree C) and age – hardened at 1300 Degree F (704 Degree C) and Furnace cool (FC) to 1125 Degree F (607 Degree C).Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union FittingsFor this reason, a considerable development effort has been generated on Alloy B3 Union Tube Fittings in three other “very high strength” conditions.
