Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304H Flanges, which is a steel alloy with a minimum of 10.5 % chromium content by mass. Our Stainless Steel 304H Slip On Flanges is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. These Stainless Steel 304H Threaded Flanges does not readily corrode, rust or stain with water as ordinary steel does. However, our Stainless Steel 304H Weld Neck Flanges is not fully stain – proof in low – oxygen, high – salinity, or poor air – circulation environments.
These Stainless Steel 304H Blind Flanges is used where both the properties of steel and corrosion resistance are required. Our Stainless Steel UNS S30409 Socket Weld Flanges differs from carbon steel by the amount of chromium present. These unprotected Stainless Steel 304H Lap Joint Flanges rusts readily when exposed to air and moisture. Since iron oxide has lower density than these Stainless Steel 304H Ring Joint Type Flanges, the film expands and tends to flake and fall away.
Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges
In comparison, our Stainless Steel 304H Spectacle Blind Flanges contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface. The layer prevents further corrosion by blocking oxygen diffusion to the surface of these Stainless Steel 304H Spacer Flanges and stops corrosion from spreading into the bulk of the metal.
Stainless Steel 304H Pipe Flanges Specifications |
||
| Specifications | : | ASTM A182 / ASME SA182 |
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
SS 304H Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304H | 0.10 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 10.5 | – |
Stainless Steel 304H Plate Flanges Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 304H Stainless Steel Industrial Pipe Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304H | 1.4301 | S30409 | – | – | – | – | – |
SS 304H Flanges Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website : Sachiya Sheet Plates
Sachiya Steel International is skilled manufacturing house and supplier for Stainless Steel 304H Angle, which is manufactured from alloy containing nickel as base element with additions of chromium.
This Stainless Steel 304H Angle are designed to have exceptionally high strength and creep – rupture properties at higher temperatures and pressures.
The high alloy content enables our Stainless Steel 304H C-Channel to withstand a wide variety of severe corrosive environments.This Stainless Steel 304H H-Beam also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined and welded.
Our Stainless Steel 304H I-Beam is used for industrial furnaces; heat – treating equipment such as baskets, muffles, and retorts; petrochemical and other process equipment; and gas – turbine components.
This Stainless Steel 304H T-Beam are also used in Hardware, Petro – Chemical Industry, Oil and Gas Industry, Nuclear Industry, Pulp & Paper Industry, Research & Development, Mega Projects & Defense & Development Industries.Stainless Steel 304H Angle | Stainless Steel 304H Angle | Stainless Steel 304H Angle | Stainless Steel 304H Angle | Stainless Steel 304H Angle | Stainless Steel 304H Angle | Stainless Steel 304H Angle | Stainless Steel 304H Angle | Stainless Steel 304H AngleOur Stainless Steel 304H Chain are manufactured to sustain very high pressure and product warranty.
Heat Resistance retains its strength over a wide spectrum of temperatures, thus making SS 304H Angle suitable for applications where steel would succumb to creep.
