Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 330 Round Bars, which has oxidation resistance and has excellent weldability and braze – ability. Typical applications of Incoloy 330 Round Bars would be heat exchangers, radiant tubes, gas turbines, salt pots and perlite processing. The 35 % nickel content of SS 330 Square Bars is considered the optimal figure for carburization resistance and it is highly resistant to thermal shock. With proper practices, Ra 330 Flat Bars can be satisfactorily machined. Incoloy 330 Threaded Bars is often the alloy of choice for retorts, fixturing, muffles and baskets.
Also capability to prevent formation of oxidation layer at high temperature makes welding of SS 330 Hollow Bars easier in industry grade applications. When buying a heat resistant alloy, insist on quality, insist it is Ra 330 Hexagonal Bars, where its oxidation resistance is enhanced by the silicon content. The microstructure of Incoloy 330 Triangular Bars maintains its stability even after being exposed to high temperatures for long durations. The strength and oxidation resistance of SS 330 Bars at high temperatures make it a useful material for industrial heating furnaces.
Incoloy 330 Round Bars | Incoloy 330 Round Bars | Incoloy 330 Round Bars | Incoloy 330 Round Bars | Incoloy 330 Round Bars | Incoloy 330 Round Bars | Incoloy 330 Round Bars
Ra 330 Rods is ideally suited for demanding, high – temperature, high – pressure applications such as chemical and petrochemical processing, ore processing, power generation and thermal processing. Alloy 330 Round Bars has good strength at high temperatures and excellent resistance to carburizing and oxidizing atmospheres.
Incoloy 330/ SS 330/ Ra 330 Round Bar Specifications |
||
| Specifications | : | ASTM B511 / ASTM SB511 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
330/ SS330/ Ra 330 Incoloy Round Bar Chemical Composition
| Grade | C | Mn | Si | Mo | S | Cr | Cu | Ni | P |
| Incoloy 330/SS 330/Ra 330 | 0.08 max | 2.00 max | 0.75 – 1.50 | 1.00 – 1.75 | 0.03 max | 17.0 -20.0 | 1.00 max | 34.0 -37.0 | 0.03 max |
Equivalent Grades for 330/ SS330/ Ra 330 Incoloy Round Bar
| STANDARD | WERKSTOFF NR. | UNS |
| Incoloy 330 / SS 330 /Ra 330 | 1.4886 | N08330 |
Incoloy 330/ SS330/ Ra 330 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website: Steel Pipe Factory
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 800 Round Bars, where when cold formed extensively the grain size produces a visibly undulated surface called “orange peel”.
Excellent cold forming characteristics typically associated with the nickel – chromium alloys are exhibited with Incoloy 800 Round Bars.
The carbon range of 0.05 % to 0.10 % is within the ASTM and ASME specification limits for Incoloy 800H Square Bars and is in the upper portion of that range.
Incoloy 800HT Flat Bars is used for process piping, heat exchangers, heating – element sheathing, carburizing equipment, and nuclear steam – generator tubing.Incoloy 800 Threaded Bars remains ductile during long term use at temperatures below 1290 Degree F (700 Degree C) due to a maximum titanium and aluminum content of 0.7 %.
Alloy 800H Hollow Bars is a solution heat treated (2100 Degree F), controlled-carbon version of Alloy 800 Hexagonal Bars with improved elevated temperature properties.Incoloy 800 Round Bars | Incoloy 800 Round Bars | Incoloy 800 Round Bars | Incoloy 800 Round Bars | Incoloy 800 Round Bars | Incoloy 800 Round BarsIncoloy 800HT Triangular Bars is an alloy of nickel, chromium and iron, which is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures While Incoloy 800 Bars is generally used at temperatures below 600 Degree C, Incoloy 800HT Rods are recommended for applications requiring superior creep properties at higher temperatures.
Incoloy 800H Round Bars can be welded by the common techniques used on stainless steels.Incoloy 800/800H/800HT Round Bar SpecificationsSpecifications:ASTM B408 / ASTM SB408Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISize:5 mm To 500 mmDiameter:0.1 mm to 100 mmLength:100 mm To 3000 mm Long & AboveFinish:Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA FinishTolerance:H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirementsForm:Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.800/800H/800HT Incoloy Round Bar Chemical CompositionGradeCMnSiAlSCrCuNiFeIncoloy 8000.10 max1.50 max1 max0.15 – 0.600.015 max19.0-23.00.75 max30.0-35.039.5 minIncoloy 800H0.05 – 0.101.50 max1 max0.15 – 0.600.015 max19.0-23.00.75 max30.0-35.039.5 minIncoloy 800HT0.06 – 0.101.50 max1 max0.15 – 0.600.015 max19.0-23.00.75 max30.0-35.039.5 minIncoloy Alloy 800/800H/800HT Rods Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.94 g/cm31385 °C (2525 °F)Psi – 75,000 , MPa – 520Psi – 30,000 , MPa – 20530 %Equivalent Grades for 800/800H/800HT Incoloy Round BarSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENIncoloy 8001.4876N08800NCF 800NA 15ЭИ670Z8NC32-21X10NiCrAlTi32-20Incoloy 800H1.4958 / 1.4876N08810NCF 800HNA 15(H)ЭИ670Z8NC33-21X5NiCrAlTi31-20Incoloy 800HT1.4859 / 1.4876N08811NCF 800HTNA 15(HT)ЭИ670–X8NiCrAlTi32-21 Incoloy 800/800H/800HT Round Bar Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels.
The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres.
The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F. Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc.In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316.
SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures.
Ra 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.
Ra 330 Tube Fittings has oxidation resistance to 2100 Degree F and resistant to carburization and nitriding.Incoloy 330/SS 330/Ra 330 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Incoloy, 300/1000/3000PSI for Brass Incoloy Alloy 330/SS 330/Ra 330 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiCrSnPb3300.08 max2.00 max0.75-1.500.03 max1.00 maxBalance34.0-37.017.0-20.00.0250.005 max Equivalent Grades for 330/SS 330/Ra 330 Incoloy Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSIncoloy 3301.4886N08330 Alloy 330/SS 330/Ra 330 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer of Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels.
The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres.
The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F.Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc.
In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316.
SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures.Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male FittingsRa 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.
Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.
