
During TP-Link Extender Setup, you need an Extender Password to access the network when you connect other devices to the extender and for this you have to follow many instructions and steps to the extender setup. During the Extender Setup, you have to need Extender Password which connects the Extender setup with the LED lights which shows that the connections has done right or not. You have need to connect the wifi extender to a power source.
Steps required setup the TP-Link Extender:-
Before setting up the TP-Link Extender, you have to collect all the information about the wifi router and Extender Password to access the network.
These are the steps explained below which may be follow to setup the TP-Link Extender:-
Firstly, connect the TP-Link Extender to the power source. There would be different colours of lights on the cable modem such as Green, Amber and blink light which indicates different-different things. If there is no showing blinking of LED lights, then you can tap the power button.
Thereafter, connect your system with the extender’s wifi network. It probably takes few minutes depending on how many networks are available around the system. Sometimes, the extender network comes within two options, like either it comes without password or default password is “password.” In those cases, you have to turn on your wifi connection. Then go to the TP-Link Extender’s credentials where you would be select the answer and two security questions which helps you to recover the wifi extender’s credential details when you forget them.
Thereafter, click on the Next button, and your extender will search for the local wifi networks which are available at that time. If you are unable to find out the existing network, you can search for more results. After locating your network, tap on the Next button and it will ask to enter your Extender Password. At last, select the Finish button if all these things are correct and here, your wifi extender would be set up.
Wrap up:-
Through these steps, you will find out that the TP-Link Extender will reboot and allow access to the internet axis. Firstly, you have to test it with modem cable and thereafter start it using wireless. An Extender Password is required when you connect your devices to the extender.
Call on 833-666-7003