Stainless Steel 446 Round Bar Manufacturer in India

Sachiya Steel International is one of the Leading Manufacturer of Stainless Steel 446 Threaded Forged Fittings, which is commonly used for various fasteners and pins that require strength and resistance to galling.

Because of its high – hardness capability, Stainless Steel 446 Forged Threaded Elbow is seldom welded, because the additions of 4 % silicon and 8 % manganese inhibit wear, galling, and fretting.

However, if welding is necessary, the parts of Stainless Steel 446 Forged Threaded Tee should be preheated and maintained at about 500 Degree F, welded, and then immediately given a 6 hour – 8 hour anneal at 1350 Degree F / 1400 Degree F with a slow furnace cool.The parts of Stainless Steel 446 Forged Threaded Cross should not be allowed to cool below 500 Degree F between welding and annealing, where high welding heat inputs should be used.

To obtain mechanical properties of Stainless Steel 446 Forged Threaded Cap in the weld similar to those in the base metal, welding consumables of like composition should be considered.Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings In cutlery applications, grinding and polishing are very important, where Stainless Steel 446 Forged Threaded Fittings works well in these operations.

Do not overheat while grinding Stainless Steel 446 Forged Threaded Coupling, since both the hardness and corrosion resistance may be lowered.

Typical applications of Stainless Steel 446 Forged Threaded Union are large airframe structural components and injection moulding equipment.Stainless Steel 446 Forged Threaded Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/8” NB to 4” NB (Socket weld & Screwed-Threaded)Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Fittings SS 446 Forged Fittings Chemical Composition GradeCMnSiPSCrMoNiNSS 4460.020 max1.50 max0.75 max0.040 max0.030 max23 – 30–0.50 max0.25 max Stainless Steel 446 Threaded Fitting Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75000 , MPa – 485Psi – 40000 , MPa – 27520 % Equivalent Grades for 446 Stainless Steel Forged Fittings STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762 / 1.4763S44600––––– Stainless Steel 446 Forged Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.

Nova Steel Corporation is one of the leading Round Bars Manufacturer in Mumbai, India.

We give a wide range of Round Bars accessible in various evaluations.

These Round Bars are available in a variety of sizes, forms, and dimensions, and can also be customized to meet the needs of our customers.

We also deal in Pipes & Tubes, Sheets Plates Coils, Pipe Fitting, Fastener, Flanges,  XM19/Nitronic Round Bars, Lf2 Round Bars, Alloy Steel 4340 Round Bars, and  Duplex Round Bars.

Website: https://novasteelcorporation.com/Round Bars: Round Bars Manufacturer Mail us: sales@novasteelcorporation.comCall us: 91 22 66518818

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 446 Flanges, which is available in dissimilar sizes and shapes for our clients.

Our Stainless Steel 446 Slip On Flanges is an age – hardening martensitic stainless combining high strength with the corrosion resistance of stainless steel.

Unlike conventional martensitic stainless steels, these Stainless Steel 446 Threaded Flanges is quite weldable, where hardening is achieved by a short – time and simple low – temperature treatment.

The strength, corrosion resistance and simplified fabrication can make our Stainless Steel 446 Weld Neck Flanges a cost – effective replacement for high strength carbon steels as well as other stainless grades.At the solution treating temperature, 1900 Degree F, these Stainless Steel UNS S44600 Blind Flanges is austenitic but undergoes transformation to a low – carbon martensitic structure during cooling to room temperature.

This transformation in our Stainless Steel 446 Socket Weld Flanges is not complete until the temperature drops to 90 Degree F. Subsequent heating of these Stainless Steel 446 Lap Joint Flanges to temperatures of 900 Degree F – 1150 Degree F for one to four hours precipitation strengthens the alloy.Stainless Steel 446 Flanges | Stainless Steel 446 Flanges | Stainless Steel 446 Flanges |Stainless Steel 446 Flanges | Stainless Steel 446 Flanges |Stainless Steel 446 Flanges | Stainless Steel 446 FlangesThis hardening treatment in our Stainless Steel 446 Ring Joint Type Flanges as well tempers the martensitic structure, increasing ductility and toughness.

These Stainless Steel 446 Spectacle Blind Flanges is an austenitic heat resistant alloy with oxidation resistance to 1900 Degree F under constant temperature conditions.Stainless Steel 446 Pipe Flanges SpecificationsSpecifications:ASTM A182 / ASME SA182Size:1/2″ (15 NB) to 48″ (1200NB)Standards:ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.Class / Pressure:150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.SS 446 Pipe Flanges Chemical CompositionGradeCMnSiPSCrMoNiNFeSS 4460.2 max1.5 max0.75 max0.04 max0.030 max23 – 30–0.50 max0.10 – 0.25BalanceStainless Steel 446 Plate Flanges Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75,000 , MPa – 485Psi – 40,000 , MPa – 27520 %Equivalent Grades for 446 Stainless Steel Industrial Pipe FlangesSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600–––––SS 446 Flanges Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.