Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. The Rebar couplers are also suitable for use in reinforced concrete columns and walls. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. In construction joints, rebar couplers can be used to replace all pieces of rebar going through the formwork. Our range of products include Taper Rebar Coupler, Cold Forged Rebar Coupler Type II, Steel Rebar Coupler, Cramping Rebar Coupler, MBT Rebar Coupler and Bar Break Rebar Coupler. We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.
Surya Engineering is one of the leading Manufacturers, Suppliers and Exporters of Mechanically Bolted Couplers.
The Mechanical Bolted (MBT) coupler is a precast concrete structure used in the construction of highways, bridges, roads and railways. It is used in road construction where there is a lack of adequate length or lack of suitable foundation for the conventional precast concrete box culvert.
The MBT (Mechanical Biological Treatment) coupler is used where the requirement of lap length is not there. These are generally used in situations where the number of rebars is very less and it can be done mechanically with bolts only which is how it gets its name as Mechanically Bolted Coupler or MBT Coupler.
MBT couplers are the most widely used in the world of Construction engineering. If you are interested in using bolted Coupler, you can contact us at any time. We provide a high-quality tensile MBT Coupler.
Surya Mechanical Bolted Coupler is specially designed for the construction of bridges and buildings. The mechanical bolt couplers are used where lack lap length because of the need to have a long span. These bolted couplers have high Tensile strength and the ability to transfer load during seismic movements.
Bolted Coupler Mechanical Bolted Coupler is used where there is a lack of lap length for the mechanical bolted joint. It is made up of high-quality steel and undergoes strict quality inspection during fabrication.
Bolted couplers are most commonly used where the distance between the point of installation and the end of the TMT bar is less than 14" (35.56 cm) to connect the Coupler. Based on this, the MBT coupler has been developed which is a combination of mechanical bolting and welding. In this mechanically bolted coupler, after connecting and bolting both TMT Bar. After the complete Coupling process, two TMT Bar become one single Bar and a new connection joint is formed at that junction which becomes as strong as a welded TMT bar.
