Nitrogen Generator MaintenanceLooking for nitrogen generator maintenance?

With our team of strategically located, fully factory trained service engineers we provide service, maintenance and repair throughout the UKIATT not only supply and install products for Compressed Air Filtration, Air and Gas Treatment, Refrigeration Dryers, Water Chillers, Desiccant Dryers and Onsite Nitrogen Generation, but we also provide a wide range of service plans and nitrogen generator maintenance solutions for our customers and clients.With our team of strategically located, fully factory trained service engineers, we provide our fantastic products as well asnitrogen generator maintenanceand servicing provisions throughout the UK.IATT always provide service that is efficient, effective, economical, and equitable – we call it e4.

Desiccant Compressed Air DryerLooking for desiccant compressed air dryers?

IATT offer a complete range of desiccant air dryers suitable for drying small to large areas.

Air dryers are available at low cost throughout the UKDry, oil and particle free compressed air is vital to most compressed air systems used in industry.

Compressed air dryer treatment with filtration is also essential.

When it comes to drying compressed air, a compressed air Desiccant Compressed Air Dryer provides the ideal solution for the removal of residual water vapour to provide low dew points of -40° C/F and lower.IATT offer two compressed air dryer technologies suitable for demanding purpose applications that meet the highest standards as specified in ISO 8573:1.These two products are the Heatless Modular Desiccant Compressed Air Dryer and the Vacuum Regenerative Twin Tower Desiccant Air Dryer.

The Heatless Modular Desiccant Compressed Air Dryer is more suitable for drying small to large volumes of compressed air to a typical pressure dew point of -40° C/F with other options for dryers producing PDP’s of -20°C to -70°C.The Twin Tower technology is more suitable for drying air from -20°C to -70°C pressure dew point (PDP) capable of handling small to large flow rates of compressed air.

Lab Gas GeneratorsWe Supply a wide variety of lab gas generators & laboratory nitrogen generators for gases such as hydrogen and nitrogen.

Nitrogen generators are available at low cost throughout the UKThe IATT AiroGen® Laboratory Generator rangeoffers a safe and simple to use efficient technology for high purity H2, N2 and ZERO AIR analytical grade laboratory gases.

The technology makes the gas cylinder redundant and the high purity gases you require available as and when you need them.

IATT AiroGen® Lab GasGenerators offer a module design and can also be stacked to meet compact storage requirements, this makes them perfect for usage within multiple generation applications.What is Adsorption?To fully understand lab gas generators and swing adsorption technology, we must first explore what adsorption is.

Adsorption refers to a gas application such as nitrogen generation, and is the accumulation of molecules of oxygen and other trace gases.This accumulation is used to form a thin film on the surface of a specifically selected solid, such as carbon, by intermolecular forces.

The adsorption process involves a mass transfer and differs from absorption, where a specific fluid is dissolved by a liquid or solid.

PSA Nitrogen GeneratorLooking for PSA nitrogen generators?

IATT offer a full range of both maxi and large capacity nitrogen generators with flow rates up to 700 Nm/hr and purity from 95% to 99.999%.

Contact us today!The technology of PSA Nitrogen Generators produces nitrogen with a high purity of up to 99,9999% with 1.0 ppm residual oxygen covering flow rates from a few Nm3/hr to over 10,000 Nm3/hr.

Like Membrane systems, these PSA Nitrogen Generators are also designed as free standing modular systems for easy integration into new or existing plant installations.

This gives you that added versatility and choice around the system and positioning of said system to best benefit your operations.PSA technology is advanced and based on the adsorption principle, which is as follows: nitrogen and oxygen molecules from the intake atmospheric air are separated by a carbon molecular sieve (CMS).

The larger nitrogen molecules penetrate the system as they are not adsorbed by the activated carbon of the CMS.

Compressed Air Dryer UKLooking for compressed air dryers in the UK?

IATT have decades of expertise & service all types of compressed air systems including compressed air refrigerated dryers and air filtration systems.

Contact us today!Our engineers are Fgas trained and conduct gas leak detection in line with all current and relevant regulations.

They are the best of the best and are tactically and strategically placed around the UK in order to ensure a quick delivery of products and services as well as a professional job each and every time.

We have years of experience within the industry and our teams are experts at what they do, so you can rest assured that you will receive a high quality of customer service, installation, servicing, and maintenance when you work with IATT, and you can also rest assured that the product you order with ourselves is of the highest quality and reliability.High Efficiency Compressed Air Dryerswith IATTThe IATT High Efficiency Compressed Air Refrigerated Dryer range is one of our core products and one that is designed to provide clean dry compressed air to a wide variety of industrial and manufacturing applications that demand economic compressed air dryer treatment.Designed and built to exacting standards in Italy – this range is the most popular Refrigeration Compressed Air Dryer in the world and one we proudly provide to our customers.

With over 25 years of experience in the global compressed air dryer treatment industry, this technology offers unique benefits of optimum efficiency, low cost of ownership and reduced energy consumption.

Industrial Oxygen Generators  We supply a range of industrial oxygen generators for industrial scale applications.

Available at low cost throughout the UK, contact us for all your onsite oxygen generator requirements IATT supply, install and service High Flow Onsite Oxygen Generators for large Industrial, medical and commercial  applications.We are experts in all things provided on our website and have years in the industry to back up our position as an industry-leader.Expert Installation, Supply, Service, and MaintenanceIn order to successfully carry out the supplying and installing of all products available at our site, we use a dedicated team of staff of factory trained, highly skilled engineers who are strategically placed across the UK.This puts us in prime position to see to any requirements your business or site may have, and allows us to fulfil your specific requirements.

All of our team are vastly experienced and more than capable of carrying out any works required with a professional attitude and high level of ability whether it’s installation, servicing, or general maintenance..

Compressed Air Treatment System UKCompressed air treatment system & compressed air filters in the UK - IATT supply a comprehensive array of compressed air filters with flow rates up to 25,500 Nm³/h.

Contact us today!But whatare compressed air filters?

If you aren’t sure whether or not you need a compressed air filter within your operations, or whether it’s worth using IATT for your compressed air filter requirements, do read on.Essentially, high efficiency compressed air filters when used with energy efficient elements, like those at IATT, ensure that pressure drops are minimal without compromising service life and compressed air quality.As experts in the industry with years of experience, IATT supply a comprehensive array of compressed air filters with flow rates up to 25,500 Nm³/h (15,000 scfm), featuring particulate removal filter grades from 0.01 to 25 micron and oil droplet, and mist & vapour removal down to 0.003 mg/m3.

Compressed air filter types and variations provided by ourselves include water separators, pre and after filters and activated carbon filtration.

This gives you the widest number of applications possible when it comes to compressed air filters when you order with IATT.

Lab Gas Generators We Supply a wide variety of lab gas generators & laboratory nitrogen generators for gases such as hydrogen and nitrogen.

Nitrogen generators are available at low cost throughout the UKThe IATT AiroGen® Laboratory Generator range offers a safe and simple to use efficient technology for high purity H2, N2, and ZERO AIR analytical grade laboratory gases.

The technology makes the gas cylinder redundant and the high purity gases you require available as and when you need them.

IATT AiroGen® Lab GasGenerators offer a module design and can also be stacked to meet compact storage requirements, this makes them perfect for usage within multiple generation applications.What is Adsorption?To fully understand lab gas generators and swing adsorption technology, we must first explore what adsorption is.

Adsorption refers to a gas application such as nitrogen generation, and is the accumulation of molecules of oxygen and other trace gases.This accumulation is used to form a thin film on the surface of a specifically selected solid, such as carbon, by intermolecular forces.

The adsorption process involves a mass transfer and differs from absorption, where a specific fluid is dissolved by a liquid or solid.

Lab Gas GeneratorsIndependent Air Treatment Technology Ltd. (IATT) is a British company with our head office in North East England.

We provide a national coverage of fully factory trained engineers strategically located throughout the UK that specialise in compressed air and gas generation technology.We provide services to the manufacturing, food, beverage, chemical, laboratory, pharmaceutical, brewing and process industries – if you use compressed air then IATT can Supply, Install and Service your equipment.IATT have an enviable reputation for Service Excellence and rapid response to customer needs – we are renowned for our independent approach.Our independence ensures we always select and supply the very best products and equipment solutions to suit your specification for Compressed Air Filtration, Air and Gas Treatment, Refrigeration Dryers, Desiccant Dryers ,Water Chillers and Onsite Nitrogen Generation Technology.

Desiccant Compressed Air DryerLooking for desiccant compressed air dryers?

IATT offer a complete range of desiccant air dryers suitable for drying small to large areas.

Air dryers are available at low cost throughout the UKDry, oil and particle free compressed air is vital to most compressed air systems used in industry.

Compressed air dryer treatment with filtration is also essential.

When it comes to drying compressed air, a compressed air Desiccant Compressed Air Dryer provides the ideal solution for the removal of residual water vapour to provide low dew points of -40° C/F and lower.IATT offer two compressed air dryer technologies suitable for demanding purpose applications that meet the highest standards as specified in ISO 8573:1.These two products are the Heatless Modular Desiccant Compressed Air Dryer and the Vacuum Regenerative Twin Tower Desiccant Air Dryer.

The Heatless Modular Desiccant Compressed Air Dryer is more suitable for drying small to large volumes of compressed air to a typical pressure dew point of -40° C/F with other options for dryers producing PDP’s of -20°C to -70°C.The Twin Tower technology is more suitable for drying air from -20°C to -70°C pressure dew point (PDP) capable of handling small to large flow rates of compressed air.

Breathing Air SystemsLooking for Breathing Air Systems?

IATT offers a full range of breathing air packs & systems which deliver pure, clean breathing air.

Air systems are available at low cost throughout the UKWe provide a range of breathing air systems at IATT, with clean compressed air suitable for breathing and medical applications.

These are vital in maintaining a healthy environment for workers and users.IATT offers a full range of Breathing Air Systems and Packs that deliver pure, clean breathing air.

The breathing air systems we provide range from 2 man stations to full medical air treatment packages.

All equipment is designed and manufactured in line with the latest BS, HTM, and European Pharmacopeia standards.All systems are installed and validated in accordance with current legislation and have remote/additional alarms and an optional electronic PC management interface for added peace of mind.