A homelody robinet is a valve which contr&taxes;the débit of water. It is généusually utilisé a évier kitchen to facilitate the use of domestic water. Here's how to use and maintain the valves d'évier:
1. During the installation of the faucet, various impuretés into the water line need to &stop;tre complètement éliminées éviter that the impuretés are cleanedées and cause problèmes, such as damage to the c&cover ur of the valve and jams. , Bloqué or leaking. In m&stop, me time, the surface of the faucet needs to &stop;tre cleanedée éviter les matématerials décoratifs résiduels.
2. No matter what type of faucet should not &our vision to be too hard when using it, just the twist or the dial gently to use it, and not to use the poignée as a support for the handrail. The lid of the filter of the drain outlet must &our vision to be removedé and cleanedé régulièsurely, and l'éequipment / tools hose setupé to éalso keep its natural extension to éavoid the rupture of the water pipe.
3. Some valves do not close complètement little time après use, leaks, poignées desserrées, connections desserrées and other leaks. Usually, this situation can &stop;tre résolue of it-m&our vision to me.
4. If the homelody robinet de cuisine of the nozzle d'étanchéité of the valve cap à thin plate in the céceramic bearing is not complètement fermé, it is possible that débris hard to have rayé the surface d'étanchéité or that the strength of pré-clamping appliedée the cap of the valve is insufficient. To this point, if it is rayé by a hard object, you need to find a company that does maintenance on après-vente. If the strength of pré-clamping of the valve is insufficient, you need to remove the poignée and tighten the coil.
5. The valve of the faucet needs to &stop;tre essuyé gently with a clean soft cloth trempé on détergent, in éavoiding cleaning it with a loop métallique, and a cleaning cloth containing hard objects and in éavoiding the hard objects do not come into contact with the surface of the faucet.
6. If there are stains on the faucet, such as masks épais and sédiments, you can use a glass cleaner neutral liquid, glass cleaner liquid, transparent pure, a soft liquid without acid and non-abrasive or powder complètement dissolved, friction-free Solution. Remove cleaning agents such as gloss.
7. Do not use abrasive cleaners, cloth or paper towel, or cleaning agents containing acid, Polish abrasives or cleaning coarse to clean the bathroom Faucet.
Après have installé the faucet, it is recommendedé to clean the stains and fingerprints on the surface every two months. Rinse the surface à water and sécher with a soft cloth. The maintenance of the appearance and the brightnessé can &our vision to be cleanedé once a month with wax for car. For reasons esthéticks, the surface is cleanedée and the internal cleansing is the most important factor affecting the hardée of life. In addition, if the amounté of tap water is répick or fork à water is répick, it means that the bubbler tap is bloqué. To this point, you should remove the bubbler, soaking it in vinegar and clean débris with a small brush or other tool. Réinstall it then.
Note on the cleaning of the valve:
(1) Do not wipe the surface of the valve with a hard object, such as a steel ball, because the steel ball is très hard and it is easy to scratch the surface of the faucet.
(2) It is préférable to use a détergent neutral for cleaning. The acid cleaners and alkaline powerful is not suitable for the cleaning with a Mitigeur.
(3) Après have cleanedé the faucet, use a towel sèche lint-free to wipe off water remaining on the surface (there goes the m&stop, me for window cleaning) to d'éavoid the formation of tartar.
https://www.homelody-fr.com/products/moderne-chromee-colonne-douche-avec-ecran-lcd
http://neikasworld.ning.com/profiles/blogs/caract-ristiques-et-avantages-des-robinets-cascade
Warum verliert Ihre Küchenarmatur plötzlich den Wasserdruck?Ihr Küchenarmatur hat plötzlich den Wasserdruck verloren.
Als Erstes müssen Sie sicherstellen, dass dies der einzige Bereich in Ihrem Haus ist, in dem der Wasserdruck gesenkt wird.
Wenn der Wasserdruck nach dem Entfernen des Belüfters steigt, schalten Sie das Wasser ohne Belüfter ein, und Sie werden wissen, dass dies das Problem ist.
Reinigen Sie den Luftsprudler und stecken Sie ihn wieder in den Wasserhahn.Wenn das Entfernen des Inflators nicht zur Lösung des Problems beiträgt, kann dies zu einer Verstopfung führen.
Mineralien können in Ihren Rohren verstreut sein und den Einlass der Patrone blockieren.
Wenn Sie immer noch nicht genug Wasser haben, müssen Sie wahrscheinlich die Patrone ersetzen.Wenn Ihre Wasserhähne getrennt sind, ist es auch ein guter Zeitpunkt, die Versorgungsleitung zu spülen.
