Sachiya Steel International is one of the well-established Manufacture & Exporter of high quality Stainless Steel 310H Threaded Forged Fittings, which is silver – coloured metal that conducts heat and electricity well. Stainless Steel 310H Forged Threaded Elbow is too reactive to exist alone so it only occurs naturally in the earth’s crust as iron ores, such as hematite, magnetite, and siderite. Identifying characteristics of Stainless Steel 310H Forged Threaded Tee is that it is strongly magnetic.
Stainless Steel 310H Forged Threaded Cross is exposed to a strong magnetic field, where any piece of steel can be magnetized. Stainless Steel 310H Forged Threaded Cap is most troublesome characteristic is its tendency to form rust. Rust (or ferric oxide) is a brown, crumbly compound that is produced when Stainless Steel 310H Forged Threaded is exposed to oxygen. The rate of rust – how quickly Stainless Steel 310H Forged Threaded Coupling turns into ferric oxide – is determined by the oxygen content of the water and the surface area of the steel.
Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings
Rust can be prevented by coating Stainless Steel 310H Forged Threaded Union with other metals that are chemically more attractive to oxygen, such as zinc (the process of coating iron with zinc is referred to as ‘galvanizing’). However, the most effective method of protecting against rust is the use of the Stainless Steel 310H Forged Threaded Bushing.
Stainless Steel 310H Forged Threaded Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
SS 310H Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 310H | 0.10 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24 – 26 | – | 19 – 21 | 53.885 min |
Stainless Steel 310H Threaded Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310H Stainless Steel Forged Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310H | – | S31009 | – | – | – | – | – |
Stainless Steel 310H Forged Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For more details:
Web: https://steeltube.co.in/
Phone: +91 9769056007
E-Mail: sales@sachiyasteel.com
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 446 Forged Threaded Fittings, which is commonly used for various fasteners and pins that require strength and resistance to galling.
Because of its high – hardness capability, Stainless Steel 446 Forged Threaded Elbow is seldom welded, because the additions of 4 % silicon and 8 % manganese inhibit wear, galling, and fretting.
However, if welding is necessary, the parts of Stainless Steel 446 Forged Threaded Tee should be preheated and maintained at about 500 Degree F, welded, and then immediately given a 6 hour – 8 hour anneal at 1350 Degree F / 1400 Degree F with a slow furnace cool.The parts of Stainless Steel 446 Forged Threaded Cross should not be allowed to cool below 500 Degree F between welding and annealing, where high welding heat inputs should be used.
To obtain mechanical properties of Stainless Steel 446 Forged Threaded Cap in the weld similar to those in the base metal, welding consumables of like composition should be considered.
In cutlery applications, grinding and polishing are very important, where Stainless Steel 446 Forged Threaded Fittings works well in these operations.Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings Do not overheat while grinding Stainless Steel 446 Forged Threaded Coupling, since both the hardness and corrosion resistance may be lowered.
Typical applications of Stainless Steel 446 Forged Threaded Union are large airframe structural components and injection moulding equipment.
Sachiya Steel International is one of the pioneer Manufacture and Exporter for Stainless Steel 904L Threaded Forged Fittings, which have excellent resistance to warm seawater and chloride attack.
The corrosion resistance properties of Stainless Steel 904L Forged Threaded Elbow are not as good as the 18 – 8 chromium – nickel steels and its susceptibility to carbide precipitation during welding restricts its use in many applications.
The mechanical properties for the different tempers of Stainless Steel 904L Forged Threaded Tee are obtained by cold working and not by heat treating.Stainless Steel 904L Forged Threaded Cross has a minimum tensile strength and is used in the fabrication of parts that require moderate drawing or forming.
Stainless Steel 904L Forged Threaded Cap is a non – stabilized austenitic stainless steel with low carbon content.
This high alloy Stainless Steel 904L Forged Threaded Fittings/ is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid.Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged FittingsStainless Steel 904L Forged Threaded Coupling is also resistant to stress corrosion cracking and crevice corrosion.
Stainless Steel 904L Forged Threaded Union is non – magnetic, and offers excellent formability, toughness and weldability.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices.
The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures.
Stainless Steel 304L Threaded Forged Tee does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.Stainless Steel 304L Threaded Forged Cross Performs well in freshwater service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting.
Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes.
The best machining results in Stainless Steel 304L Threaded Forged Fittings are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings For maximum corrosion resistance, Stainless Steel 304L Threaded Forged Coupling should be annealed at 1900 Degree F (1038 Degree C) minimum and water quenched or rapidly cooled by other means after hot working.
Stainless Steel 304L Threaded Forged Union is not suitable for use with sulphide, nitric acid, acid chromates, or oxidizing salts such as ferric chloride.
Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
Sachiya Steel International is one of the prominent Manufacture of high quality Stainless Steel 310H Wire Mesh, which Good resistance to mildly corrosive atmospheres, but significantly less than Grade 310H due to the Sulphur addition; the sulphide inclusions act as pit initiation sites.
Grade 310 should not be exposed to marine or other similar environments, as these will result in rapid pitting corrosion.
Because the sulphide inclusions in 310 are primarily aligned along the rolling direction the corrosion resistance is particularly reduced in cross-sections.It is like other common austenitic stainless steels, is subject to stress corrosion cracking in chloride containing environments above about 50°C.
Good oxidation resistance in intermittent service to 760°C and in continuous service to 870°C.
Welds must be annealed for maximum corrosion resistance, but even then poor mechanical and corrosion properties will result.For ultra-high machining rates there are also available special grade variants such as Ugima 303UX.
This includes copper to reduce the work hardening rate, in addition to the usual high Sulphur and Improved Machinability steel making practices.
