Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304 Threaded Forged Fittings, which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. Components of Stainless Steel 304 Forged Threaded Elbow using the combination of excellent corrosion restainless-steel-304-threaded-forged-fittings-supplier-exportersistance and high strength currently include pumps, valves and fittings, fasteners, cables.
Stainless Steel 304 Forged Threaded Tee has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. The additions of Silicon and Manganese have given Stainless Steel 304 Forged Threaded Cross a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths of Stainless Steel 304 Forged Threaded Cap are attainable through cold working the material and are still fully austenitic after severe cold – working. In addition, Stainless Steel 304 Forged Threaded Fittings has very good mechanical properties at both elevated and sub – zero temperatures.
Stainless Steel 304 Threaded Forged Fittings | Stainless Steel 304 Threaded Forged Fittings | Stainless Steel 304 Threaded Forged Fittings | Stainless Steel 304 Threaded Forged Fittings | Stainless Steel 304 Threaded Forged Fittings | Stainless Steel 304 Threaded Forged Fittings | Stainless Steel 304 Threaded Forged Fittings
|
Stainless Steel 304 Forged Threaded Fittings Specifications
|
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website: Steel Tube
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 304 Forged Threaded Fittings, which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range.
Components of Stainless Steel 304 Forged Threaded Elbow using the combination of excellent corrosion restainless-steel-304-threaded-forged-fittings-supplier-exportersistance and high strength currently include pumps, valves and fittings, fasteners, cables.Stainless Steel 304 Forged Threaded Tee has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature.
The additions of Silicon and Manganese have given Stainless Steel 304 Forged Threaded Cross a matrix to inhibit wear, galling, and fretting even in the annealed condition.
Higher strengths of Stainless Steel 304 Forged Threaded Cap are attainable through cold working the material and are still fully austenitic after severe cold – working.Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded FittingsIn addition, Stainless Steel 304 Forged Threaded Fittings has very good mechanical properties at both elevated and sub – zero temperatures.
And, unlike many austenitic stainless steels, Stainless Steel 304 Forged Threaded Coupling does not become magnetic when cold worked.
The benefit to the cold or hot work put into Stainless Steel 304 Forged Threaded Union is added strength and hardness, and the wear resistance does not decrease noticeably.
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 446 Forged Threaded Fittings, which is commonly used for various fasteners and pins that require strength and resistance to galling.
Because of its high – hardness capability, Stainless Steel 446 Forged Threaded Elbow is seldom welded, because the additions of 4 % silicon and 8 % manganese inhibit wear, galling, and fretting.
However, if welding is necessary, the parts of Stainless Steel 446 Forged Threaded Tee should be preheated and maintained at about 500 Degree F, welded, and then immediately given a 6 hour – 8 hour anneal at 1350 Degree F / 1400 Degree F with a slow furnace cool.The parts of Stainless Steel 446 Forged Threaded Cross should not be allowed to cool below 500 Degree F between welding and annealing, where high welding heat inputs should be used.
To obtain mechanical properties of Stainless Steel 446 Forged Threaded Cap in the weld similar to those in the base metal, welding consumables of like composition should be considered.
In cutlery applications, grinding and polishing are very important, where Stainless Steel 446 Forged Threaded Fittings works well in these operations.Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings | Stainless Steel 446 Forged Threaded Fittings Do not overheat while grinding Stainless Steel 446 Forged Threaded Coupling, since both the hardness and corrosion resistance may be lowered.
Typical applications of Stainless Steel 446 Forged Threaded Union are large airframe structural components and injection moulding equipment.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices.
The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures.
Stainless Steel 304L Threaded Forged Tee does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.Stainless Steel 304L Threaded Forged Cross Performs well in freshwater service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting.
Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes.
The best machining results in Stainless Steel 304L Threaded Forged Fittings are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings For maximum corrosion resistance, Stainless Steel 304L Threaded Forged Coupling should be annealed at 1900 Degree F (1038 Degree C) minimum and water quenched or rapidly cooled by other means after hot working.
Stainless Steel 304L Threaded Forged Union is not suitable for use with sulphide, nitric acid, acid chromates, or oxidizing salts such as ferric chloride.
Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
