Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Stainless Steel 310H Socket Weld Fittings, which contain between the ranges of 1 % – 5% of other metals (often nickel or tungsten). Stainless Steel 310H Forged Socket Weld Elbow is an alloy of iron and various other metals, which are used to enhance the properties (strength, resistance to corrosion, tolerance of heat, etc.) of iron. Changing the type and amount of the elements alloyed with iron in Stainless Steel 310H Forged Socket Weld Tee can produce different types of steel. Stainless Steel 310H Forged Socket Weld Cap is able to withstand high levels of tension and is, thus, often used in the construction of bridges and for making bicycle chains.
Stainless Steel 310H Forged Socket weld Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Pipe Fittings, which show features like good weld – ability and excellent machinability with or without addition filler metals.
Our Stainless Steel 310H Compression Pipe Fittings also shows good corrosion resistance to a widespread range of corrosive environments.
These Stainless Steel 310H Compression Fittings is effective in many applications where carbon steel, galvanized, aluminized or painted steel or aluminum give unsatisfactory life.
Our SS 310H Ferrule Pipe Fittings is not attacked by strong alkalis, and often gives adequate resistance in mildly acidic conditions.Light surface rust can form in many atmospheres, making these Stainless Steel 310H Double Ferrule Pipe Fittings unsuitable for decorative applications.
Our Stainless Steel 310H Accessories is strongly resists chloride stress corrosion cracking, but is less resistant than 304 to pitting and crevice corrosion in chloride environments.
These 310H Stainless Steel Compression Pipe Fittings is likely to resist water with chloride contents of up to 100 mg/L to 200 mg/L at ambient temperatures.Stainless Steel 310H Pipe Fittings | Stainless Steel 310H Pipe Fittings | Stainless Steel 310H Pipe Fittings | Stainless Steel 310H Pipe Fittings | Stainless Steel 310H Pipe FittingsThe presence of sulphide or nitrate ions in our 310H Stainless Steel Compression Fittings will reduce the corrosively of chlorides.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Tube to Male Fittings, which is considered resistant at ambient temperatures and reducing to about at 60 Degree C. Our Stainless Steel 310H Tube Fittings is equivalent to Grade 310 in the annealed condition and superior if the application involves service in the 425 Degree C – 900 Degree C range.
These Stainless Steel 310H Compression Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 50 Degree C.This treatment in our Stainless Steel 310H Male Connector Fittings follows normal solution treatment, where heat up to approx.
870 Degree C – 890 Degree C for thickness and air cool.
Stabilization of these Stainless Steel 310H Ferrule Tube Fittings is recommended for most severe service conditions (above 425 Degree C) and particularly for material annealed at the upper side of the annealing temperature range.
Our Stainless Steel 310H Ferrule Double Ferrule Tube Fittings combines excellent service properties at high temperatures by means of ease of fabrication.These Alloy 310H Tube Fittings resists oxidation at temperatures up to 1150 Degree C and can provide superior service to Grade 304 in carbon, nitrogen and Sulphur containing atmospheres.
Although not designed for aqueous corrosion resistance, the high chromium and nitrogen content gives our SS 310H Male Connector Fittings a pitting resistance approximating that of 316.Stainless Steel 310H Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass SS 310H Tube To Male Fittings Chemical Composition GradeCMnSiPSCrMoNiNSS 310H0.04 – 0.102 max1.00 max0.045 max0.030 max24.00 – 26.00–19.00 – 21.0053.885 min Stainless Steel 310H Tube To Male Fittings Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540% Equivalent Grades for 310H Stainless Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 310H–S31009––––– SS 310H Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us:Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Flanges, which is a series of proprietary grades, generally with a 0.03 % maximum carbon and sometimes used for very specific corrosive environments such as urea production.
Like other austenitic grades, these Stainless Steel 310H Slip On Flanges have excellent toughness, even down to cryogenic temperatures, although other grades are normally used in sub – zero environments.
The high chromium content – intended to increase high temperature properties – also gives these Stainless Steel 310H Threaded Flanges good aqueous corrosion resistance.Sea water resistance of our Stainless Steel UNS S31009 Weld Neck Flanges is about 22 Degree C, which is similar to that of Grade 316.
In high temperature service, these Stainless Steel 310H Blind Flanges exhibit good resistance to oxidizing and carburizing atmospheres.
Our Stainless Steel 310H Socket Weld Flanges resist fuming nitric acid at room temperature and fused nitrates up to 425 Degree C. The high carbon contents do make these Stainless Steel 310H Lap Joint Flanges susceptible to sensitization and hence inter–granular corrosion after elevated temperature exposure or welding.Stainless Steel 310H Flanges | Stainless Steel 310H Flanges | Stainless Steel 310H Flanges | Stainless Steel 310H Flanges | Stainless Steel 310H Flanges | Stainless Steel 310H Flanges | Stainless Steel 310H FlangesOur Stainless Steel 310H Spectacle Blind Flanges are often produced in “Dual Certified” form – mainly in plate and pipe, which as well have chemical and mechanical properties.
These Stainless Steel 310H Ring Joint Type Flanges is subject to stress corrosion cracking but more resistant than SS 304 or SS 316.Stainless Steel 310H Pipe Flanges SpecificationsSpecifications:ASTM A182 / ASME SA182Size:1/2″ (15 NB) to 48″ (1200NB)Standards:ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.Class / Pressure:150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.SS 310H Pipe Flanges Chemical CompositionGradeCMnSiPSCrMoNiNSS 310H0.04 – 0.102 max1.00 max0.045 max0.030 max24.00 – 26.00–19.00 – 21.0053.885 min Stainless Steel 310H Plate Flanges Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540%Equivalent Grades for 310H Stainless Steel Industrial Pipe FlangesSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 310H–S31009––––– SS 310H Flanges Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
