7 Best WhatsApp Tips Tricks and Hacks 2018

As we know, Windows defender is one of the advanced in-build antimalware software that protects your Windows operating system.

However, when a user installs any third party tool like Norton, McAfee, or more, then such an issue arises, stating, “Windows Defender 0x800704ec.” For that, here are the steps that you can use to overcome your hassles in the flick of seconds.

Make sure to pursue each instruction properly and get things done accordingly.

Turn On the Windows Defender ServicesIf you wish to turn on the Windows Defender services, then pursue the given instructions.Press Win + R keys at once on your keyboard to launch the Run dialogue box.After that, enter ‘services.msc.’ into the Run dialog box on your screen then press the Enter button.You should find Windows Defender Services on the pursuing Console and look if they are performing.When the Status column is empty, right-click on Service and choose the Start to turn on it again.Finally, reboot the system and look if the error 0x800704ec is clear now.Delete Third-Party AntivirusIf you would like to delete third-party antivirus, then abide by the given steps.To launch the Run dialogue box by pressing Win + R keys at once on your keyboard.Then enter ‘appwiz.cpl’ into the Run box and press the Enter key.On the pursuing screen, find the third-party antimalware tool which is installed in the system.Right-click on it, then choose the Uninstall option.A prompt will show up for the last verification; once more, click on the Uninstall option to delete it.Through Registry EditorIf you wish to fix the error through registry editor, then pursue the given instructions.You have to enter ‘regedit’ within the Taskbar search section, and if the result appears to see, hit the Enter key.A UAC (User Account Control) will pop-up, click on the Yes to provide corroboration.After showing up the Registry Editor wizard, go to the pursuing path through the left column: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender.Go to the right-hand side panel and find the value with ‘REG_DWORD’ Enter and twice click on it.Now, reach the Edit string, set the value 0 in the Value Data section, and select the OK to apply the changes.Alter the Settings of Group PolicyIf you would like to alter the settings of group policy, then abide by the given steps.Go to the Start tab and right-click on it, then choose the Run option.You should enter ‘gpedit.msc.’ into the Run dialogue box and press the Enter key.Here you will see ‘Local Group Policy Editor’ Wizard.

Go to the pursuing path through the left column: “Computer Configuration >Administrative Templates >Windows Components.”Find the Windows Defender Antivirus and right-click on it.Move to the right-hand side panel.

Either run a twice click on ‘Turn off Windows Defender Antivirus or right-click on it, then choose the Edit option.On the pursuing wizard, choose the radio tab of ‘Not Configured,’ and after that, select the Apply and choose the OK to apply the changes.Richard Branson is a self-professed security expert; he has been making the people aware of the security threats.

How to fix sage 50 error code 1402Sage 50 Error 1402 – Sage 50 is a business accounting software program that assists small and medium-sized organizations with handling their price range smartly.This article will offer you with the stairs which you should comply with to clear up the Sage 50 Error 1402.Causes of sage 50 error code 1402:Sage 50 Error 1402 is due to inconsistencies within side the settings of the Windows registry.

Every time you begin up a procedure on sage 50, the error code 1402 begins off evolved displaying.

These outcomes within side the software program crashing.

Your machine may also begin putting as wellAlso Read: How to fix sage-50 decline code error 14Steps to Resolve Sage 50 Error 1402In case you experience this error, press CTRL + ALT + DEL and give up the processes associated with Sage 50.

The registry continues critical settings which might be associated with home windows and different installed software program.For the initial step of the procedure, you'll want to navigate to the Start menu at the taskbar.Then, click on at the Run alternative or press the Windows Key and R for your keyboard.The Run Command window will display up after you carry out the previous step.Type in regedit after which click on OK In the quest field.Next, the Registry Editor window will open up for your screen.Browse to the location supplied below.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ComponentsAfter that, right-click on at the Components choice after which click on at the PermissionsNow, you'll want to press at the AdvancedDoing so will open up the Advanced Security Settings for the Components’ window.Then, navigate to the OwnerNote down the modern-day owner.Navigate to the Change owner segment and spotlight the present day User who's logged in.Click at the checkbox for the Replace owner on sub-containers & objects Navigate to the ApplyOnce you get hold of the Registry Editor, you is probably not able to set owner on the important thing which is chosen currently.

It also gives you a random solution to log out from your account first and then get into your account by signing in.

Then navigate to the “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList.”

Now search for the folder with ProfileImagePath indicating to c: users.

After that, you have to reboot your system and then sign in with an activated user account.

Now, the directory storage location through a text will present on your display which reads: C:\Users\(Your User)\documents.

Now, Sign out from your existing account and then re-log into your issue, creating an account.

Today's generation students go to lockstep with our continuous technology.

They always keep looking for digital solutions to help in learning.

Users can work productively with their Evernote account - by syncing all your study material - text, audio, photos, videos, projects, PDFs, anywhere and anywhere.

An excellent app for students of Wolfram Alpha College helps to get answers for a wide range of Wolfram topics, especially mathematics and science, to deal with more technical classes.

Wolfram uses a huge collection of algorithms to generate answers and generate reports for questions on various types of domains, including alpha math, physics, data analysis, chemistry, engineering, astronomy, and others.

Google Drive offers a collaborative office suite with cloud storage and includes basic support for Google Docs, Sheets and Slides.

If you are also facing it on your system, then there are numerous ways for you to fix it.

So, here are the steps to fix this error.Uninstall TuneUp Utilities and Turn off Turbo ModeIn case the user wishes to uninstall TuneUp utilities and turn off turbo mode, then they can pursue the mentioned instructions.Go to the Start logo and right-click on it.After that, choose the Apps and Features button.Go to the right-hand side panel and then choose the ‘TuneUp Utilities’ option or its associated software in the list.In case the software spreads out, select the Uninstall option.Then the program’s uninstaller wizard will show.

Click on the Uninstall option to properly wipe out from the system.Once the un-installation process wraps up, reboot the system and attempt executing a system restore.Turn off Turbo Mode  In case the user wants to turn off the turbo mode, then abide by the provided steps.You should reach ‘TuneUp Utilities Start Center.’Go to the lower left-hand side of the screen, and you will notify the field of ‘PC Optimization Mode’.You will view the Windows optimization utility that is either Standard or Economy.

However, you should select the little wrench button under Turbo and turn off the options shown here.Give a try to System Restore once more and look whether the 0x81000203 error brings up or not.Enable MS Shadow Copy Provider ServiceIn case the user wishes to enable MS shadow copy provider service, then they can pursue the mentioned instructions.Hold the Win + S keys at the same time on your system.If the best compatible shows Services Desktop application, select it,After that, find the service ‘Microsoft Software Shadow Copy Provider’ and twice click on it.You should select the drop-down section near to Start type and select Automatic.Select the Start option beneath the Service status.Launch the Control Panel and go to the System and Security option.

Then select the System button.Choose the System Protection.Beneath the “System Protection” section, choose an individual drive and henceforth select ‘Configure’.Ensure that ‘Turn on System Protection’ is active.Using the ‘Max Usage’ dragger and adjust the ‘Maximum Disk Space’ usage.Now, select the OK button and restart the PC.

Then check if this problem continues.Using Group Policy Editor to Turn on System RestoreIn case the user wants to use the group policy editor to turn on system restore, then abide by the provided steps.Press the Win + R keys at the same time on your system to launch the Run section.Thereafter, input “gpedit.msc” into it and click on the OK to reach the console of Group Policy Editor.You should select the Computer Configuration and choose Administrative Template option.Select the System and choose the System Restore option.Move to the right-hand side panel and twice click on the policy.

Many Windows 10 users are facing Windows 10 start menu is not working or Start Button is missing problems with their Laptop.

If your Start Menu isn’t functioning, listed here are a couple of troubleshooting steps you may want to try.Several software glitches continue to indulge in consumer experience on Windows 10, which is normally an incredibly reliable and efficient desktop operating system.

First: you’re facing minor Start Menu issues, which is likely due to some third party application and you can easily fix this problem with a simple reboot and clean unwanted apps data.

Next: your system is suffering from Start menu issues.

To fix this issue, you have to follow our detailed solutions for Windows 10 start menu missing issue.If you’re one of the users being bothered by such a challenge, this post is completely suitable for you.

Here are solutions for windows 10 start menu not working:  Solution 1 – Solve the Start Menu problem with the PowerShellRight-click on the Start Menu button and open Command PromptEnter PowerShell on the command line Paste the following line in the Administrator: PowerShell Window:Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”} Wait for the PowerShell to execute the command.Once done, check error logs and fix them.Reboot system.

When a Windows 10 user tries to remove the Windows 10 profile, he might get a ‘Profile not deleted completely’ error.

This specific error is complained about on all Windows 10 editions.

If you are also struggling with this error, you can follow these resolutions provided below.Turn off Windows SearchTo turn off Windows search, pursue these on-screen instructions mentioned below:To launch the Run accessory, use the Win and R keys combination over the keyboard.After that, insert ‘services.msc’ in the Run box and select the OK button.Once you get a UAC (User Account Control) pop-up, hit the Yes button.After going to the Services window, move on to the right side and go down via the available services list until you find the Windows Search see If service.Once you manage to find the right service listing, right-click on it, then select the ‘Stop’ button via the context menu.After stopping the service successfully, launch the Run accessory by pursuing the above steps.Then insert ‘SystemPropertiesAdvanced’ and hit the Enter button to invoke the System Properties window.You should enter the Advanced tab via the upper menu and select the Settings option related to the User Profiles.After going to the User Profile menu, choose the profile you would like to get rid of and hit the Delete option and verify the method to delete it properly.10.Once you have managed to delete the suspicious Windows profile without facing the exact ‘Profile not deleted completely’ error.

Hold the Win and R buttons simultaneously to launch another Run pop-up.11.Afterward, insert ‘services.msc’ into it and select the OK button to launch the Services window.

Once you see the UAC (User Account Control) prompt, press the Yes button.12.Once you returned successfully to the Services window, find the Windows Search service again via the right-side section, enable it again by right-clicking on it, and then select the Start button.Remove the Leftover Registry KeysTo remove the leftover registry keys, pursue these on-screen instructions mentioned below:To open the File Explorer, use the Win and E buttons simultaneously on the keyboard.Then go to the C:\Users folder and click on it.Then, find the folder named once the folder you would like to get rid of.Once you get it, right-click on the right folder and hit the Delete button via the context menu.Open the Run prompt by using Win and R keys altogether on your keyboard.Then insert ‘regedit’ into it and hit the OK button to bring up the Registry Editor screen.You will get a UAC (User Account Control) pop-up and then click on the Yes button.After that, utilize the left pane menu to enter the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileListBeneath the ProfileList section, you will see the keys series-parallel to a Windows Profile.

The job is to enter each entry and look at the ‘ProfileImagePath’ data related to it.10.After managing to detect the right ProfileList key that includes remnants of profile data, right-click on it, then pick the Delete button.11.Now, reboot the system.Remove the Unknown AccountTo remove the unknown account, pursue these on-screen instructions mentioned below:Invoke the Run accessory by using Win and R buttons simultaneously on your keyboard.Once it opens, insert ‘sysdm.cpl’ in it and hit the OK button.After launching the ‘System Properties’ window, select the ‘Advanced’ tab, then choose the Settings option related to the User Profiles.After getting UAC (User Account Control) pop-up, press the Yes button.Go to the User Profiles menu, choose the ‘Account Unknown‘ profile, and then hit the Delete button.Finally, reboot the system and check the issue.Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry.

Errors are bound to appear in any OS and Windows 10 is not free from them either.

“Active directory domain service is truculently unavailable” is one of the plenty errors you can face in Windows 10.

Many users have complained that when they attach a fresh printer, once it installs the required drivers or locates the printer, this error appears on their screen.

So, if you are also facing this issue, then here are the directions to repair this issue.SOURCE:-How to Fix Active Directory Domain Services Currently Unavailable Error?Sign in as AdministratorIf the users are attempting to sign in as an administrator, then they should correctly employ the given instructions.Firstly, press the Windows and S keys altogether over the keyboard to invoke the Search section.After that, input troubling into it and select the OK button.You should reach View all then choose the Printer option.Now, pursue the on-screen steps on your screen.Check Network InstallHold the Windows and R buttons altogether over the keyboard to invoke the Run section.After that, insert ‘services.msc’ into it and hit the Enter button.You should click on the Print Spooler option.Go to the Properties option and right-click on it.You have to reach the Startup Type section and set it into ‘Automatic.’Then navigate to the Service Status field, and it should be running.Now, in case it’s already running, then stop and restart.Give the Account Full Control of PrinterPortsNavigate to the Start on your system.Thereafter, insert ‘regedit’ into it and press the Enter button to invoke the Registry Editor.You should find the pursuing path: ‘HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion’Then extend the menu of CurrentVersion and reach the Devices then right-click on it.You have to choose the Permissions option.Later, mark the box of Full Control.Finally, redo the instructions over the set permission to full control on Windows and PrinterPorts.Launch Full PC ScanIf you would like to launch the full PC scan, then you can determine to pursue the directions given below.Navigate to the Start on the PC.Afterward, input ‘defender’ into it and select the OK button to invoke the Windows Defender.You should reach the left panel and click on the shield button.Go to the new screen and select the option of Advanced Scan.Now, mark the option of Full Scan to invoke the full PC malware scan.Repair the RegistryIf the users are attempting to repair the registry, then they should correctly employ the given instructions.Reach the Windows Search section.Then insert ‘cmd’ into it and press the Enter key to invoke the Command Prompt.You should choose the Run as Administrator.After that, input this command: sfc /scannow.Now, you have to wait to finish the scanning process, then reboot the system.Jack Arona  is a creative person who has been writing blogs and articles about cybersecurity.

She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users.

Her articles have been published in many popular e-magazines, blogs, and websites.

The Windows 10 operating system is the most popular desktop OS in the world.

It gives you regular updates to improve your experience and fix bugs.

But while trying to install the updates, users may face 0xc1900204 error code on their Windows 10 system.

Thankfully, this error can be easily fixed.

If you want to know how you can fix this error, then read on..

Tweak the Registry to Solve the ErrorHit the Windows and R combination over the keyboard to launch the Run prompt.Afterward, type ‘regedit’ in it and select the OK button to invoke the Registry Editor.Then go to “HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion” and click on it.After that, check the ‘ProgramFilesDir’ option and then right-click on the value.Now, modify the paths to the different folders.

With so many different vendors, features, and systems to choose from, finding the best electronic signature software in the market can be quite overwhelming.

Thankfully, we have identified 7 common mistakes which organizations make, when shopping for e-sign solutions – so you will know how to avoid them.

Choosing an e-signature solution that isn’t user-friendly

Never confuse simple with under-powered—yes, electronic signature software should be easy to use.

Choosing e-signatures that don’t integrate with the existing applications

When you buy an e-sign solution that doesn’t integrate well your existing applications, you are unlikely to enjoy the full benefits of automation.

Bing search engine is one of the inbuilt features of the Windows 10 operating system that you can find in the Start Menu.

So, disabling this feature is the perfect option.

And to help you to sort out the technique, we have come up with this article.

Here, in the following report, we have provided you with the methods through which you can easily disable the Bing in the Windows 10 Start Menu.

And here, we have mentioned two different methods that will help you to complete the task.

Now, hit the enter key.And now, go to the following path: “HKEY_CURRENT_USER\SOFTWARE\Policies\Microsoft\Windows\Explorer”.

In case you are having this problem, then there are many ways to fix it.

Here’s how to fix the media streaming problem in Windows 10.Source : http://sitemcafee.com/blog/how-to-fix-media-streaming-problem-in-windows-10/Steps for Fixing Missing Media Feature Pack   Open the ‘Turn Windows features on or off” checkbox.

You have to make a Windows Registry key.You have to go through the steps mentioned below to complete this procedure:   Click on the Windows symbol and R keys together on the system keyboard for opening the Run pop-up box.

Tap on the Enter option given on the system keyboard for opening the Windows Features pop-up menu.

Go to the Media Features located in the window below the “Turn Windows features on or off” option.

In case the Registry  Editor is not used in a correct way, then this will severely damage the computer which will ask you to reinstall the version of Windows.Once you have made a Windows Registry key, go through the steps mentioned below to start editing the Windows registry:   Go to the Run pop-up menu by clicking on the Windows symbol and R keys together on the system keyboard.